Things Needed
The MTD household of lawn mower and lawn products include Cub Cadet , Troy - Bilt and Bolens among others . The MTD labor lawn mower use many types of Briggs and Stratton engines on their push mowers . You should commute the fossil oil on the MTD push lawn mower at the start of each mop season . Briggs and Stratton recommends using 10W-30 motor oil colour for all time of year cut down . When draining the oil on your MTD you will need to find out if you have a waste pipe stopper . Usually if your oil fill cap is yellow or blank , the oil will debilitate from the fill cervix .
Step 1
Place the MTD lawn mower on a grade surface and unplug the plug telegram from the spark plug . clean-living around the oil color fill neck with a clean-living cloth .
Step 2
launch the fuel tank and localise your gas can shut to the fuel tank . Insert the big tube of a hand siphon into the lawn mower fuel tank and the smaller tube from the hand siphon off into the gas can . Pump the bulb at the top of the hand siphon to siphon the fuel from the mower into the gas can .
Step 3
site an oil drainpipe plug for your button mower . MTD uses a Briggs and Stratton engine which may or may not have an oil drain plug . If you have a drain chaw , it may be a humble plug at the al-Qaeda of the filling neck opening or there may be a hype under the deck close to the motor spear . Some Briggs and Stratton engine simply drain the old crude from the fill neck .
Step 4
Remove the crude drain plug with a ¼-inch or 3/8 - in socket spanner adapter , if you have a drain fire hydrant . Have a container nearby to catch the oil as you remove the plug . If you run out the oil from the makeweight neck , remove the roof and dipstick from the fill neck . Tip the lawn mower on its side and drain the vegetable oil into the container .
Step 5
Place the oil stopple back into billet and tighten up with the socket adapter , if your lawn mower use an vegetable oil drain plug . Place the mower on all four tires if you are draining from the filling neck opening .
Step 6
pour out in a half l of 10W-30 motor vegetable oil into the oil colour filling neck opening . Wipe the dipstick that attaches to the bottom of the filling cap with a textile . Insert the dipstick into the filling neck and perpetrate the dipstick back out . hold in the oil level on the joystick and fill with more fossil oil of necessary .
Step 7
put the filling cap back onto the fill neck opening and fasten it by turning the detonating machine clockwise . Fill the fuel tank with gas and plug the spark chaw wire onto the discharge plug .
Tip
Contact an machine division put in about disposing your used mower oil .
Warning
Always disconnect the spark chaw wire before attempting repairs on your MTD mower .
